Reading The Control Panel Lights - Epson Stylus COLOR 800N User Manual

Troubleshooting
B A
B A
P S B A
P S B A
You can use the printer's hex dump mode to pinpoint
communication problems. Then you can fax the printout
to a technical support representative or interpret it yourself.
See page 6-3 for instructions.
For the latest information, check the
COLOR
EPSON
If none of the suggested solutions in this chapter solve your
problem, contact
Help" in the Introduction.

Reading the Control Panel Lights

Follow these guidelines when the control panel lights come on
or flash:
.
When the paper light flashes, paper is jammed in the printer.
S
Turn off the printer and gently pull out all paper. Then press
the E load/eject button. See page 6-14 for more information.
When the paper light comes on, your paper ran out or is
S
incorrectly loaded. Load paper in the feeder and then press
the E load/eject button.
When an ink light flashes, your ink supply is low. Make sure
you have a replacement cartridge.
When an ink light comes on, you need to replace the ink
cartridge. See Chapter 5 for instructions.
When the power light and paper light flash and all the other
lights are on, your printer has a carriage error. See page 6-9
for more information.
When all the lights flash, your printer may have an internal
error. See page 6-10 for more information.
800 Help program and the ReadMe file in the
program group or folder.
as described under "Where to Get
EPSON
6-2
tylus
EPSON S