Network Printing On A Macintosh; Assigning A Name To The Printer - Epson Stylus COLOR 800N User Manual

Managing Print Jobs and Network Printing
5. Click the
Add Port
to the printer and click
6. Open the Spool Manager window as described on page 4-2.
7. In the Spool Manager window, double-click your printer's
queue. The Queue Setup dialog box appears.
8. Make sure the
Use Print Manager for this port
checked. Then click

Network Printing on a Macintosh

If you want to use your printer on an AppleTalk
need to install one of the optional interface boards: either the
™
LocalTalk board or the Ethernet
more information about optional interfaces.
Then you can use the
printer in the Chooser. The
your hard drive along with the other printer software.

Assigning a Name to the Printer

Follow these steps to use the EPSON Namer utility:
1. Double-click the
2. Click the
EPSON Stylus(AT)
window.
3. Select the zone where your printer is located.
4. Under
New Name
distinguish it from other printers on the network.
5. Click and then click
Rename
4-12
button, then specify the network path
.
OK
.
OK
™
board. See Appendix A for
Namer utility and set up your
EPSON
Namer was installed on
EPSON
icon on your hard drive.
EPSON Namer
icon in the Device Types
, type a name from your printer to
Done.
option is
™
network, you