Wireless Connection; Install Software; Troubleshooting - Epson Stylus NX530 Start Manual

6
Install software
Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see "Epson technical
support").
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
M ake sure the printer is NOT CONNECTED to your
computer.
W indows : If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable. You can't install your
software that way.
2
Insert the product CD.
3
W indows: If you see the AutoPlay window, click
Run Setup.exe. If you see the User Account Control
screen, click Yes or Continue.
M ac OS X: Double-click the
®
4
Click Install (Windows) or Continue (Mac OS X) and follow
the instructions on your computer screen.
5
When you see the Select Your Connection screen, check
the "Connection options" section on this sheet for more
information.
Choose your connection. Then click Next (Windows) or
Continue (Mac OS X) and follow the instructions on your
computer screen.
Epson icon.
Connection options

Wireless connection

You must install the software on every computer from which you
want to print. For the first installation, we recommend using a
USB cable (not included) to simplify wireless setup. After the
printer is connected to the network, you will be prompted to
remove the cable.
If you're using Mac OS X 10.6 or 10.7, or you don't have a USB
cable, you will need to use the control panel on the printer to
select wireless settings. Follow the installation on your computer
screen during software instruction; they will explain how to
connect the printer wirelessly this way.
Make sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set up
your network.
Direct USB connection
Make sure you have a USB cable (not included).
Wired network connection
Make sure you have an Ethernet
You must install the software on every computer from which you
want to print.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• I f you see a firewall alert message, click Unblock or Allow to
let setup continue.
• I f your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. If it has uppercase (ABC) or lowercase (abc) letters,
make sure you enter them correctly.
P ress , , , or
function button on the screen. Press OK to select it.
U se the function buttons to select uppercase (AB12),
lowercase (ab12), symbols (!#%@), spaces (
delete characters (
When you're finished, highlight Done and press OK.
You see error messages on the printer's LCD screen.
See your Quick Guide for troubleshooting information.
network cable (not included).
®
Function buttons
on the printer to highlight a letter or
), or to
).