接地线连接 Connection Of Grounding Wire - TBEA TS208KTL-HV Series User Manual

如图4-18所示：
Fix the L1, L2, and L3 cables to the internal
the chassis, and tighten the screws. The nut used is M10 or M12 and the
tightening torque is 15N·m, as shown in Figure 4-18.
（4） 锁紧交流输出接口的锁紧螺母。
Lock the lock nut of the
4.2.5
接地线连接 Connection of Grounding Wire
警告！ Warning!
光伏 保护接地线必须正确连接，否则将损坏设备。
The protective earth line must be properly connected,
otherwise the equipment may be damaged.
图4-18 线缆紧固图
Figure4-18 Cable fastening diagram
output interface.
AC
56
output terminals of
AC