Lectrical Connection; 输入输出要求 In-Put & Out-Put Requirements - TBEA TS208KTL-HV Series User Manual

的组合螺栓紧固，紧固力矩为7N·m，如图4-13所示。
Hanging and fixing the inverter to the installation bracket of
the wall with 2 pcs M8 assembling bolts, the tightening
torque is 7N·m, shown as 4-13 figure.
（2） 安装完毕。
The installation is completed.
4.2 电气连接 Electrical Connection
4.2.1
输入输出要求 In-put & Out-put Requirements
所有输入、 输出及通讯均采用逆变器自带或标配防水端子进行连
接，如果采用其他连接端子与逆变器连接，所产生的一切后果由客户
自行承担。
图 4-13 逆变器安装示意图
Figure 4-13 Inverter Installation Instruction
44