Epson AcuLaser M2300D series User Manual page 145

6. If the printer is connected to a USB interface, select USB, then click Next, or if the printer is
connected to a parallel interface, select LPT1, then click Next.
7. Click Have Disk and specify the following path for the Software Disc. If your CD-ROM drive is D:,
the path will be D:\ADOBEPS\(your printer name)\PS_SETUP. Then click OK.
Note:
Change the drive letter as needed for your system.
8. Select the printer, then click Next.
9. Follow the on-screen instructions for the rest of the installation.
10. When installation is done, click Finish.
Installing the PostScript printer driver for the network interface
Note:
❏ Set the network settings before installing the printer driver. Refer to the Network Guide that comes
with your printer for details.
❏ Turn off all virus protection programs before installing the printer software.
1. Make sure that the printer is turned on. Insert the printer Software Disc into your CD-ROM
drive.
2. For Windows 7, click the start button, select Devices and Printers, and click the Add a printer
button.
For Windows Vista, Vista x64, XP, XP x64, Server 2008, or Server 2008 x64, click Start, point to
Printer and Faxes, and click Add a printer in the Printer Tasks menu.
For Windows 2000, Server 2003, or Server 2003 x64, click Start, point to Settings, and click
Printers. Then double-click the Add Printer icon.
3. The Add Printer Wizard appears. Then click Next.
4. Select Local printer, then click Next.
Note:
Do not select the Automatically detect and install my Plug and Play printer check box.
5. Select the Create a new port check box and select Standard TCP/IP Port from the drop-down
list. Click Next.
Epson AcuLaser M2300/M2310/M2400/M2410 Series User's Guide
About the Printer Software 145