Epson AcuLaser M2300D series User Manual page 130

Setting up a client
This section describes how to set up a client computer by accessing the shared printer on a network.
Note:
❏ To share the printer on a Windows network, you need to set the print server. For details, see "Setting
up the print server" on page 127.
❏ This section describes how to access the shared printer on a standard network system using the server
(Microsoft workgroup). If you cannot access the shared printer due to the network system, ask the
administrator of the network for assistance.
❏ This section describes how to install the printer driver by accessing the shared printer from the
Printers folder.
❏ When you want to use EPSON Status Monitor at a client, you have to install EPSON Status Monitor
from the Software Disc with administrator privileges in each client.
❏ If you want to monitor a shared printer with several users on a client computer, select the Allow
monitoring of shared printers check box in EPSON Status Monitor.
Installing the printer driver using an additional driver
Follow the instructions below to install the printer driver on a client computer using an additional
driver installed on the print server.
You can install the printer driver for the shared printer, if you have Power Users or more powerful
access rights even if you are not the Administrator.
For Windows Vista or Vista x64, even if you are not an administrator or power user, you can install the
printer driver by clicking Continue when the prompt to continue the installation appears.
Note:
The illustrations in this section show Windows XP screens. They may be different from the screens for
your operating system.
1. For Windows 7 or 7 x64 clients, click
For Windows Vista or Vista x64 clients, click
Printers.
For Windows XP or XP x64 clients, click Start, point to Printers and Faxes.
For Windows 2000 clients, click Start, point to Settings, and click Printers.
Epson AcuLaser M2300/M2310/M2400/M2410 Series
Start, then select Device and Printers.
Start, click Control Panel, then double-click
User's Guide
About the Printer Software 130