Epson AcuLaser M2300D series User Manual page 109

Epson AcuLaser M2300/M2310/M2400/M2410 Series User's Guide
Check Paper Type
Explanation:
The paper loaded in the printer does not match the paper type setting in the printer driver.
Load the correct type of paper into the printer. To clear the warning, press the Information button on
the control panel.
ROM check
Explanation:
The printer is checking the ROM.
Cancel Print Job
Explanation:
The printer is canceling the current print job.
Wait until the cancellation is finished.
Cancel Print Job (by host)
Explanation:
The print job is canceled at the printer driver.
Wait until the cancellation is finished.
Insufficient Memory for Current Task
Explanation:
The printer has insufficient memory to execute the current task.
Press the Start/Stop button on the control panel to resume printing, or press the + Cancel Job button
to cancel the print job.
Insufficient Memory for Duplex Printing
Explanation:
There is not enough memory for duplex printing.
The printer prints only on the front and ejects the paper. Press the Start/Stop button to print on the
back of the next sheet, or press the + Cancel Job button to cancel the print job. Printing resumes
automatically after a certain period of time.
Page contains too much data to process
Explanation:
The required time to process the print data exceeded the print engine speed because the current page
is too complex.
Replace the loaded paper with the correct size paper and press the Start/Stop button to resume
printing, or press the + Cancel Job button to cancel the print job.
Troubleshooting 109