Joining The Output Paper Together - Epson Stylus Photo R2000 User Manual

Epson Stylus Photo R2000
Tip:
Regarding the size after joining together:
When Borderless Poster Print is cleared and
printing with margins is selected, the Print Cutting
Guides items are displayed.
The finished size is the same whether or not Trim
Lines is selected. However, if Overlapping
Alignment Marks is selected, the finished size is
smaller with an overlap.
E
Check other settings and start printing.
Joining the output paper
together
The steps for joining the output paper together differ
between borderless poster printing and poster printing
with margins.
Borderless poster printing
This section describes how to join four printed pages
together. Check and match the printed pages, and join
them in the order indicated below using an adhesive
tape on the back of the sheets.
User's Guide
Printing Varieties
Poster printing with margins
When you select Overlapping Alignment Marks, the
following marks are printed on the paper. See the
procedures below to join the four printed pages together
using the alignment marks.
The following describes how to join four printed pages
together.
A
Cut the upper left sheet along the alignment
mark (vertical blue line).
Tip:
The alignment marks are black for
black-and-white printing.
61