Installing The Boot Manager; Upgrading The Boot Manager - Nokia EM5400 Installation Manual

Note
If you forget your installation password, contact the appropriate
Nokia Customer Support site as listed in
page 3 for information about how to set a new password.

Installing the Boot Manager

The boot manager is installed at the factory; you should not need to reinstall
it. If you do need to reinstall the boot manager, contact the appropriate
Nokia Customer Support site as listed in
page 3 for instructions and a new boot manager.
The command to install the boot manager has the following syntax:
install_bootmgr boot-device boot-file
where boot-device is the storage device to which you write the new boot
manager image and from which the boot manager image loads at boot up, and
boot-file is the new boot manager and is named nkipflash. Execute the
install_bootmgr command from Nokia IPSO (the operating system), not from
the boot manager.
To install the new boot manager, at the IPSO command prompt enter:
/etc/install_bootmgr wd0 /image/current/bootmgr/nkipflash
The command installs the new boot manager image (nkipflash) into the
compact flash device (wd0). The installation takes some time to complete. Do
not interrupt the installation process.

Upgrading the Boot Manager

The command to upgrade the boot manager has the following syntax:
upgrade_bootmgr boot-device boot-file
Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
Installing the Boot Manager
"Nokia Contact Information"
"Nokia Contact Information"
on
on
71