Noise Cancel Auto (Au); Ground Balance Manual - Minelab X-TERRA PRO Instruction Manual

Sensitivity
The X‑TERRA PRO detector is highly sensitive and
has adjustable Sensitivity� Setting the correct
Sensitivity level for individual detecting conditions
will maximise detection depth�
Always choose the highest stable Sensitivity setting to get
the best performance from your detector�
The Sensitivity Indicator on the LCD shows the approximate
Sensitivity level in increments of 5�
Level 1 – 5 Level 6 – 10 Level 11 – 15
ADJUST THE SENSITIVITY LEVEL
Before reducing the Sensitivity, always try to
resolve noise by first performing:
ƒ Noise Cancel (page
Ground Balance (page 24)
ƒ
The Sensitivity Level is shown on the Target ID Display while
it is being adjusted, and will disappear after 3 seconds of
inactivity�
1. Holding the coil stationary, use the Plus button to
increase the Sensitivity level until false signals begin to
occur�
The Plus button
2. Reduce the Sensitivity level by pressing the Minus
button, just enough that the false signals disappear�
The Minus button
3. Sweep the coil over a clear patch of ground, and
decrease the Sensitivity Level further if there is still
some ground noise�
CONTENTS
Level 16 – 20 Level 21 – 25
23), followed by
17