Install The Ribbon Cartridge - Oki ML490 User Manual

Install the Ribbon Cartridge

Important!
Make sure you have the correct replacement ribbon for the
your printer. The wrong ribbon will not print when installed
in your printer.
Ribbon Cartridge Handling
• Leave unused ribbon cartridges in their packages until
needed.
• Careful; the ribbon ink may cause permanent stains.
• Ribbon ink on skin or clothing can usually be removed
with soap and water.
1 Make sure the printer is turned OFF.
2 Open the access cover and center the printhead (1).
84
Microline 490/491 User's Guide
CAUTION!
The printhead may be HOT!
3 Unpack the new ribbon cartridge and install it on the
printhead.
Important!
Do not remove the ribbon shield (1) from the ribbon!
4 Turn the take-up knob (1) in the direction of the molded-in
arrow to take up any ribbon slack.
5 Close the access cover and turn the printer on.