Pcl Emulation Menu - Oki C530dn User Manual

PCL Emulation Menu

ITEM
FONT SOURCE
FONT NO.
FONT PITCH
FONT HEIGHT
SYMBOL SET
A4 PRINT
WIDTH
WHITE PAGE
SKIP
CR FUNCTION
LF FUNCTION
ACTION
Specifies the location of the PCL default font.
RESIDENT
Normally this will be INTERNAL unless addi-
RESIDENT
tional fonts are installed in the expansion
2
ROM slot or additional fonts have been
downloaded to RAM as permanent fonts.
Sets the current default font number from
I0 ~ 190
the currently selected source.
Sets the width of the PCL default font in
0.44 CPI ~
10.00 CPI
characters/inch (CPI).
~ 99.99
Default font is the fixed-pitch, scalable font.
CPI
The value is displayed to the second decimal
place
Displayed only when the font selected in
Font No. is fixed-spacing, scalable font.
Height of the PCL default font.
4.00
POINT ~
Note: This menu item is displayed only when
12.00
the font selected in Font No. is a propor-
POINT ~
tional-spacing, scalable font.
999.75
POINT
PCL symbol set. If the font source and num-
PC-8
ber are changed to one which does not sup-
(DEFAULT
port the selected symbol set, this must be
SYMBOL
changed to an available symbol set for that
SET ONLY
font.
SHOWN)
Sets the number of columns subject to Auto
78
COLUMN
LF with A4 paper in PCL. This is the value
when Auto CR/LF Mode is set to OFF with the
80
10CPI character.
COLUMN
Selects whether blank pages are printed or
OFF
not.
ON
CR Selects whether a received carriage return
character (0Dh) also causes a line feed.
CR + LF
Selects whether a received line feed charac-
LF
ter (0Ah) also causes a carriage return.
LF+CR
49
– C330/C530 Menu Functions
EXPLANATION