Readme File - Oki C5400 Installation Instructions Manual

Oki c5400: software guide
Hide thumbs Also See for C5400:
Table of Contents

Advertisement

Windows Network Installation: Model C5400n Only
Software: TCP/IP (cont.)
Configuring the Print Server via
the Embedded Web Page
For more detailed information, see the OkiLAN
Note:
8100e SoftNIC User's Guide on the Manuals CD
supplied with your printer.
Activate your web browser (Netscape Navigator
version 4.0 or higher, or Microsoft
version 4.0 or higher), then enter the IP Address for the
printer (this will be found on the Network Information
configuration sheets generated when you press the Test
button on the back of the printer).
From this page you can
Enable/disable protocols.
Change the IP address, Subnet Mask and
default Gateway to meet the requirements for
your particular network environment.
When done, save and submit your changes to the print
server to make them permanent. When prompted, enter
the following:
User Name = Root.
Password = Last 6 digits of the MAC Address
(this will be found on the Network
Information configuration sheets generated
when you press the Test button on the back of
the printer).
Activating the Optional
Accessories
If your printer has an optional duplex unit, internal hard
drive or second paper tray installed, you must enter the
driver and activate it.
To Activate in the Postscript Emulation
Driver:
Click Start → Settings → Printer.
Right click the Postscript emulation printer icon, then
click Properties.
®
®
®
Internet Explorer
7
Windows 2000, XP and NT 4.0:
Click the Device Settings tab.
Scroll down to Installable Options.
Click Duplex, then click Installed. Do the same
thing for Hard Disk. If you have the optional
paper tray installed, click Available Tray and
select 2.
Windows Me, 98 and 95:
Click the Device Options tab.
Select Duplex Option Unit, Printer Hard Disk,
and select the optional second paper tray if
installed.
Click OK, then close the Printers dialog box.
To Activate in the PCL Driver:
Click Start → Settings → Printer.
Right click the PCL printer icon, then click Properties.
Click the Device Options tab.
Select Duplex Option Unit, Printer Hard Disk, and/or
set Available Tray to 2.
Click OK, then close the Printers dialog box.
The On-Line Printer User's
Guide
Note: In order to open the on-line User's Guide, you must
have Acrobat Reader installed.
Insert the Manuals CD into your CD-ROM drive and follow
the on-screen instructions to view or install the User's
Guide.

Readme File

Please refer to the readme file on the Drivers CD supplied
with your printer for the latest information on printer
drivers.

Advertisement

Table of Contents
loading

This manual is also suitable for:

C5400nC5400dnC5400dtnC5400tn

Table of Contents