Table of Contents
Advertisement
Windows Network Installation: Model C5400n Only
Software: TCP/IP (cont.)
Install the Drivers
To Install the Postscript Emulation Driver
□
Click the Printer Driver Installer button.
□
The Local or network printer dialog box appears.
Select Network Printer. Click Next.
□
The Connection type dialog box appears. Select
Directly to the network... and click Next.
□
The TCP/IP Connection dialog box appears. Follow
the on-screen instructions to complete the installation.
To Install the PCL Driver
Use the Add Printer wizard:
Click Start → Settings → Printers [Printers and
□
Faxes for XP] → Add Printer.
The Add Printer Wizard appears.
□
Follow the on-screen instructions.
Note:
When prompted. select Local port, then
select LPT1 temporarily. After the driver is
installed, go back and set its port up for the
network.
The PCL driver is located on the Drivers CD
under
Drivers\C5400n\english\win2k_xp\ok725.inf
□
Click Finish.
Use the Oki LPR Utility to discover the printer:
□
To activate/install the LPR utility: from the Menu
Installer Software Installation dialog box on the
driver CD, click Network Software → Installation/
Config → Oki LPR.
□
Click Remote Print, then click Add Printer.
□
Select your printer model from the list, then either enter
the IP Address manually, or click Discover and wait
for the printer to be discovered.
□
Click OK.
5
(continued on next page)
Advertisement
Table of Contents
