Automatic Feed Sequence - Oki B411d User Manual

5. Replace the tray in the printer.
Note
If you have the optional second paper tray (Tray 2)
and you are printing from the first (upper) tray
(Tray 1), you can pull out the second (lower) tray to
reload it. However, if printing from the second
(lower) tray, do not pull out the first (upper) tray as
this will result in a paper jam.

Automatic feed sequence

With no optional feed trays installed, the Autotray function in
the Print Menu is set by default to ON and the Tray sequence
function is set to DOWN. In this way, if a tray runs out of
paper, automatic feed will take place in the order Tray 1,
Tray 2 (if fitted), Multi Purpose Tray or the Manual Feed Tray,
provided that these trays are set up for identical media. Also,
configure the media size and media weight for the respective
trays in the operator panel or Configuration Tool, depending on
your printer model.
52 > B411/B431 Paper Recommendations