Printer Section; Paper Recommendations - Oki C3530 User Manual

P
RINTER SECTION
P
APER RECOMMENDATIONS
Your MFP will handle a variety of print media, including a range
of paper weights and sizes. This section provides general advice
on choice of media, and explains how to use each type.
The best performance will be obtained when using standard 20
~24 lb. (75~90g/m²) paper designed for use in copiers and laser
printers. Suitable types are:
> Hammermill
(90 g/m
> Xerox
®
> Oki
Bond (120 g/m
Use of heavily embossed or very rough textured paper is not
recommended.
Pre-printed stationery can be used, but the ink must not offset
when exposed to the high fuser temperatures used in the printing
process.
Envelopes should be free from twist, curl or other deformations.
They should also be of the rectangular flap type, with glue that
remains intact when subjected to hot roll pressure fusing used in
this type of printer. Window envelopes are not suitable.
®
> Oki
52206301 (100 count)
and
52206302 (500 count)
Labels should also be of the type recommended for use in copiers
and laser printers, in which the base carrier page is entirely
covered by labels. Other types of label stock may damage the
printer due to the labels peeling off during the printing process.
Suitable types are:
> Avery 5161 White Laser Label (Letter size)
> Avery 7162, 7664, 7666 White Laser Labels (size A4).
®
Laser Printer Radiant White, 24 lb. US Bond
²
)
®
4024, 20 lb. US Bond (75 g/m
52206101 Bright White Proofing Paper, 32 lb. US
2
)
Premium Envelopes (size #10)
C3530 MFP User's Guide
Getting Started > 23
²
)