Oki C3530 User Manual page 116

paper jam belt.jpg
> To remove a sheet from the central area of the belt,
carefully separate the sheet from the belt surface and
withdraw the sheet.
paper jam belt.jpg
> To remove a sheet just entering the fuser , separate
the trailing edge of the sheet from the belt, push the
fuser pressure release lever (1) towards the front and
down to release the fuser's grip on the sheet, and
withdraw the sheet through the drum cavity area. Then
allow the pressure release lever to rise again.
NOTE
If the sheet is well advanced into the fuser (only a short
length is still visible), do not attempt to pull it back. Follow
step 12 to remove it from the rear of the printer.
C3530 MFP User's Guide
Troubleshooting > 116