User Modes - Compaq V700 User Manual

User Modes

The video controller signal may occasionally call for a mode that is not
preset if:
You are not using a compatible Compaq video adapter.
You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the monitor
screen by using the on-screen display. User changes can be made to any
or all of these modes and saved in memory. The monitor automatically
stores the new setting, then automatically recognizes the new mode just
as it does a preset mode. In addition to the 12 preset/preload modes that
can be changed and stored, there are five user modes that can be entered
and stored. When the five user mode settings are exceeded, the newest
setting will replace the setting closest to its own setting. When "Factory
Reset" is selected from the OSD menu, the factory preset values will
replace the saved user settings in operation at the time.
To revert back to the factory default settings, select Reset from the
Factory Reset menu in the on-screen display, and the factory default
resolutions will replace the user changes made for the operating original
display mode.
1-10 English