Entering User Modes; Energy Saver Feature - Compaq 2025 User Manual

Preset
11
12
13
14
15
16
17
18

Entering User Modes

The video controller signal may occasionally call for a mode that
is not preset if:
You are not using a Compaq standard graphics adapter.
You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the
monitor screen by using the on-screen display. Your changes can
be made to any or all of these modes and saved in memory. The
monitor automatically stores the new setting, then recognizes the
new mode just as it does a preset mode. In addition to the 18
factory preset modes, there are four user modes that can be
entered and stored.

Energy Saver Feature

When the monitor is in its normal operating mode, the monitor
uses less than 70 watts of power and the Power light is green.
The monitor also supports a reduced power state. The reduced
power state will be entered into if the monitor detects the absence
of either the horizontal sync signal and/or the vertical sync signal.
User's Guide
Factory Preset Display Modes
Pixel Format
1152 x 870
1152 x 900
1280 x 960
1280 x 1024
1280 x 1024
1280 x 1024
1600 x 1200
1600 x 1200
Horz Freq (kHz) Vert Frep (Hz)
69.0
61.80
60.0
63.9
79.98
91.1
75.0
93.8
2025 Flat Panel Display
75.0
65.96
60.0
60.0
75.0
85.0
60.0
75.0
17