Table of Contents
Advertisement
• undo the 2 fixing screws of bracket "A" and the screw
securing hinge "B" (detail 1);
• remove the door and remove hinge "B" from right to left,
break the precut "F" on the opposite side and insert part "B"
(detail 6) and the bracket as shown in the figure;
• remove the lower bracket "D", refitting it in the special seat
on the opposite side (detail 2);
• position the door on the lower bracket "D";
E.9
Reversing opening of half doors
The refrigerated cupboards are normally supplied with right
opening.
The operations to be carried are those described in the
previous section, replacing reference "D" with "F" (detail 3)
• open the control panel, loosening the 2 screws located
between the panel and door;
• undo the 2 screws fixing bracket "A" and the screw securing
hinge "B" of the top door;
• remove the door and remove hinge "B" from right to left,
break the precut "F" on the opposite side and insert part "B"
(detail 6) and the bracket as shown in the figure;
• remove the middle bracket "G" (detail 4) and fix it on the
opposite side of the cabinet remove the lower bracket "D",
refitting it in the special seat on the opposite side (detail 5);
• position the upper bracket "A" between the door and the
roof of the appliance, tightening the fixing bolts;
• before tightening the screws, align the door with the panel of
the cabinet, adjusting the lower and upper brackets and
making sure the seal is perfectly fitted on all sides;
• then tighten the bracket fixing bolts.
Det.1
Det. 2
A
B
F
• position the bottom door on the lower bracket "D";
• fix the middle bracket "E";
• position the top door on the middle bracket "G";
• position the upper bracket "A" between the door and the
roof of the appliance, tightening the fixing bolts;
• before tightening the screws, align the door with the panel of
the cabinet, adjusting the lower and upper brackets and
making sure the seal is perfectly fitted on all sides;
• then tighten the bracket fixing bolts.
A
B
D
A
Det. 6
29
Advertisement
Table of Contents
