Changing The Opening Direction Of The Doors; Instructions For Totally Built-In - Electrolux ERN 29600 Instruction Booklet

I nstructions for totally built-in appliances
Door reversibility
The appliance is supplied with the right
or the left door opening. To change the
opening direction of the door proceed as in
the following instructions before installing it.
1. Unscrew the upper pin and remove the spacer
2. Remove the upper door
3. Unscrew the middle hinge and the brackets and
refit them on the opposite side
4. Refit the upper door, the upper pin and the
spacer on the opposite side
5. Unscrew the lower pin and remove the spacer
and refit them on the opposite side
I nstructions for totally built-in
appliances
Dimensions of the recess
Height (1) 1780 mm
Depth (2)
Width (3)
For safety reasons, minimum ventilation must be as
shown in Fig. Attention: keep ventilation openings
clear of obstruction.
Furthermore, it is necessary that the niche is provid
with a conduct of ventilation having the following
dimensions:
depth 50 mm
width 540 mm
60
550 mm
560 mm
min.
50 mm
200 cm 2
D567
3
2 1
PR01
min.
200 cm
2