Table of Contents
Advertisement
Henny Penny
require a minimum wire size of 6 mm to be wired to the terminal block. It is recommended that a
30 mA rated protective device such as a residual current circuit breaker (RCCB) or ground fault
circuit interrupter (GFCI) be used on the fryer circuit. Electrical requirements for each fryer are
found on the inside of the left door.
Volts
Phase
208
240
220 / 380
230 / 400
240 / 415
Ensuring Proper Ventilation
NOTICE -
The fryer should be located with provision for venting into adequate exhaust hood or ventilation
system to permit efficient removal of steam exhaust and frying odors. The exhaust canopy must
be designed to avoid interference with the operation of the fryer. Consult a local ventilation or
heating company to help in designing an adequate system.
Overview
Hertz
3
60
3
60
3
50 / 60
3
50 / 60
3
50 / 60
Ventilation must conform to local, state, and national codes.
Consult your local fire department or building authorities.
F5/ LOV 300 Open Fryer
KW per well
AMPS per well
14.0
14.0
14.0
14.0
14.0
9
Wire
39.4
3+G
34.2
3+G
24.3
3NG
24.3
3NG
24.3
3NG
FM06-077A2023
Advertisement
Table of Contents
