Table of Contents
Advertisement
Page 142 of 254
Maintenance commands
NN43001-308
Standard 01.02
Bandwidth Management
The Adaptive Network Bandwidth Management feature can be maintained
using Element Manager or LD 117.
Maintenance using Element Manager
The CAC parameters, intrazone statistics, and interzone statistics for one of
more zones are available in Element Manager from the Zones web page,
shown in Figure 27 on
use Procedure 7 on
steps in Procedure 8.
Procedure 8
Displaying CAC parameters for one or more zones
1
Select IP Network > Zones from the navigator.
The Zones web page appears (see Figure 27 on
2
Click Maintenance Commands for Zones (LD 117).
The Maintenance Commands for Zones web page appears, as shown
in Figure 28 on
their intrazone statistics by default.
3
Select Print Adaptive Network Bandwidth Management and CAC
Parameters (PRT ZCAC) from the Action drop-down list.
4
Select a zone from the Zone Number drop-down list, by doing one of the
following:
•
Select ALL to print statistics for all zones.
•
Select a specific zone number to display statistics for a specific zone.
5
Click Submit.
The Maintenance Commands for Zones web page reopens, displaying
the statistics for the specified zone or zones. A blank field indicates that
that statistic is either not available or not applicable to that zone.
Figure 36 on
page 143
May 2007
page
119. To view the intrazone or interzone statistics,
page
120. To display the CAC parameters, follow the
page
121. This page lists all the configured zones and
shows an example of the CAC parameters.
page
119).
Advertisement
Chapters
Table of Contents
