Download Print this page

Nortel Voice Mail Installation Manual page 8

Security key code
Hide thumbs Also See for Voice Mail:

Advertisement

Backing up the NAM capabilities file
After you have enabled the Security Key Code, you must back up the Norstar Voice
Mail capabilities file. This file contains all upgrade and capability information
about your Norstar Voice Mail system and must be restored along with
Norstar Voice Mail programing if a hard disk drive failure occurs.
Note: If this file is lost and your hard disk drive fails, all upgrades made to your
Norstar Voice Mail system will be lost. Ensure you store this backup in a
safe place.
Before you begin, ensure you have a blank IBM formatted 1.44 MB 3.5" floppy
disk. Label the Diskette SEKUR/Capabilities File.
To back up the capabilities file:
Password:
RETRY
ACCESS Server
BACK
NEXT ADMIN
A. Prt queue mgr
QUIT
NEXT
E. Bckp/Rstr
QUIT
NEXT
Backup & Restore
QUIT
BCKP
Insert floppy
QUIT
Backup complete
After you have completed backing up the capabilities file, make sure you store the
floppy diskette in a safe place.
P0908825 Issue 01
Norstar Voice Mail Security Key Code Installation Guide 7
1. Press ƒ · ⁄ fi .
2. Enter the default password ¤¤¤‹‡‡¤
(ACCESS2).
3. Press ADMIN .
4. Press NEXT until the display shows:
SHOW
5. Press SHOW .
SHOW
6. Press BCKP .
RSTR
7. Insert the IBM formatted floppy diskette into the
OK
floppy disk drive on the NAM and press OK .
8. Press OK .
OK
9. To end this session, press ® .
Norstar Voice Mail Security Key Code Installation Guide

Advertisement

loading

This manual is also suitable for:

Norstar voice mail 4.0