Nortel Voice Mail Installation Manual page 2

Norstar Voice Mail Security Key Code
Installation Guide
Introduction
This document provides information about the Norstar Voice Mail options that are
enabled with a Security Key Code and provides instructions for enabling any
Norstar Voice Mail Security Key Code.
Note: For information about enabling Norstar Voice Mail Voice Channels, refer
to the Norstar Voice Mail Voice Channel Upgrade Guide.
The Norstar Voice Mail system options that are enabled with a Security Key Code
are:
• Audio Messaging Interchange Specification (AMIS)
• Digital Networking
• Desktop Messaging seat licences
• Speech Recognition 2 Channels
• Speech Recognition 2 to 4 Channel Upgrade
Note: The Norstar Voice Mail software must be enabled and initialized before any
other Norstar Voice Mail Security Key Codes can be enabled.
Audio Messaging Interchange Specification (AMIS)
The Audio Messaging Interchange Specification (AMIS) is the telecommunication
industry solution to networking remote voice mail systems. AMIS provides
communication among remote sites established on a network.
Digital Networking
The Digital Networking option serves as a link between Norstar Voice Mail or
Meridian Mail systems at different locations. Networking allows the exchange of
voice and fax messages between linked mailboxes on a network. Norstar Voice
Mail systems must have Digital Networking enabled before receiving or sending
network messages. Meridian Mail systems must be equipped with Meridian Mail
Net Gateway before receiving or sending network messages.
Norstar Voice Mail Digital Networking uses Simple Mail Transfer Protocol
(SMTP) to transfer network messages.
P0908825 Issue 01 Norstar Voice Mail Security Key Code Installation Guide