Safety Instructions; Graphical Symbols - Parkside PASD 4 B2 Translation Of The Original Instructions

Warning: The vibration
emission value whilst actu-
ally using the power tool may
vary from the given values de-
pending on the type and way in
which the power tool is used.
Safety measures for the protec-
tion of the operator are to be
determined that are based on
an estimate of the actual expo-
sure under the real operating
conditions (for this, all parts of
the operating cycle are to be
taken into account, for exam-
ple, times in which the power
tool is turned off, and those
during which it is turned on but
running without a load).

Safety Instructions

Graphical symbols

Symbols used in the instruction
manual:
Hazard symbol with in-
formation on the preven-
tion of personal injury or prop-
erty damage.
Hazard symbol with in-
formation on the preven-
tion of personal injury caused
by electric shock
Symbols on the device:
Do not dispose of
devices with a built-
in battery in the
Li-ion
household waste, a fire (risk of
explosion) or water. Damaged
batteries can harm the environ-
ment and your health if poison-
ous fumes or liquids escape.
Symbols on the power adapter:
Read the instruction
manual carefully.
The power adapter is only
suitable for use indoors.
Protection class II
(Double insulation)
Electrical devices must
not be disposed of with
domestic waste.
GB
31