Installation (Contd; Plumbing Instructions - A.O. Smith ZIP User Manual

Installation (contd...)

Mount the Water Heater on the Mounting bracket. Tug downwards on the Water Heater to
ensure that the Water Heater is fixed steadily on the Mounting bracket.
Figure 9
Concrete Concrete
Wall Wall

Plumbing instructions

Figure 10 Installation Diagram
1
*Flexible Hoses to be procured by the customer, not part of standard product.
1. Wrap the Teflon tape around the inlet and outlet connections of the Water Heater to prevent
leakage.
2. Make necessary plumbing with reference to the Installation Diagram. (Refer "Installation
Diagram")
3. Install rubber seal rings at the inlet and outlet connections.
4. Connect the cold water pipe to the inlet.
5. Connect the hot water pipe to the outlet.
Mounting
screw
2
Concrete
Wall
Water Water
Heater Heater
2
Te on
tape
6
Mounting
screw
1
Water
Heater
*Flexible
Hose
Hot Cold
Water Tap Water Tap