Installation - A.O. Smith ZIP User Manual

Installation

Before installing, ensure the tools Adjustable wrench, Teflon tape, Measuring tape, Hammer,
Bubble level indicator and Impact drill tool are available.
Mounting the Water Heater
• It is recommended as per IS 302-1 to have 6
inches clearance from wall.
• Select a place to mount Water Heater in a
vertical position nearby water fittings.
Figure 5
Ceiling Ceiling
Water
6 inch.
Heater
• Mark the holes using Mounting template
(Step 1).
• Drill 3 holes of diameter 6 mm (Step 2).
Figure 7
Holes
1
Mounting
Template
Hole
2
Mounting
Template
• Water Heater must be located within 2 ft.
• Make sure that the wall can withstand at
Figure 6
Wall Wall
6 inch.
• Insert the Expansion Anchor into the hole
• Insert the Mounting screw over the
Figure 8
Drilling
Tool
5
(approx.) from a 230 V power supply with
proper grounding.
least twice the weight of the Water Heater
when completely filled with water.
Solid Solid
Solid Solid
Concrete Concrete
Concrete Concrete
False
Wall Wall
Wall Wall
(Step 1).
Expansion Anchor and tighten the
Mounting screw by rotating it till it gets
fixed steadily (Step 2).
Expansion
1
Anchor
Concrete Concrete
Wall Wall
2
Mounting
Concrete Concrete
screw
Wall Wall
MCB RCCB
2 ft.
ON ON
OFF OFF
Wall