Selecting The Di Model - Zoom B2FOUR Operation Manual

Selecting the DI MODEL

The DI MODEL section of the B2 FOUR has 6 selectable types that reproduce the characteristics of vacuum
tube and solid-state DIs.
The DI MODEL affects the output of the BALANCED OUTPUT, OUTPUT and PHONES jacks.
1.
Press to select the DI MODEL.
TUBE 1
TUBE 2
TUBE 3
SOLID STATE 1
SOLID STATE 2
SOLID STATE 3
OFF
This models the characteristics of a vacuum tube DI with rich harmonics
and thick low frequencies.
This models the characteristics of a vacuum tube DI with a clear attack and
tight low frequencies.
This models the characteristics of a vacuum tube DI with a clear beautiful
sound.
This models the characteristics of a solid-state DI with moderate
compression and a sharp tone.
This models the characteristics of a solid-state DI with a clear tone and
little distortion.
This models the characteristics of a solid-state DI evocative of the Motown
sound.
This turns off the DI MODEL.
21