Zoom B2FOUR Operation Manual page 46

3.
Use and
4.
Use and
This copies/saves the patch memory, and reopens the
Patch memories shown as "Empty" are currently unused.
HINT:
• In step 3 or 4, pressing
and reopen the
• Patch memories will not be saved automatically if the AUTO SAVE function is OFF. When the AUTO SAVE
function is OFF, if the content of a patch memory has been changed,
of the screen, showing that it is different from the saved settings.
• When the AUTO SAVE function is OFF, "SAVE" will be shown instead of "COPY" in step 2.
AUTO SAVE function)
to select the patch memory to copy, and press
to select the patch memory copy/save destination, and press
to select "CANCEL" and pressing
MEMORY Screen.
MEMORY Screen.
(→ Setting the AUTO SAVE
46
.
will cancel copying/saving
will appear at the top right
function)
(→ Setting the
.