Table of Contents
Advertisement
Setting the recording time
This sets the recording time for the loop.
1.
Turn
on the Looper Effect Setting Screen
Setting
MANUAL
♩×1–64
NOTE:
• The setting options include MANUAL and 1 – 64 quarter notes.
• The looper recording time is 1.5 – 30 seconds (15 when UNDO is ON) for stereo, and 1.5 – 60 seconds (30
when UNDO is ON) for mono. To switch between stereo and mono, see
• Settings that would exceed the maximum recording time will be adjusted automatically.
• Changing the recording time will delete the recorded data.
(→ Setting the looper
Recording will continue until stopped manually or the maximum
recording time is reached.
This sets the value to 1 – 64 quarter notes. The actual recording time
depends on the BPM (tempo) setting
The recording time (seconds) = 60 ÷ BPM × quarter notes.
When the set recording time is reached, recording will stop and loop
playback will start.
65
effect).
Explanation
(→ Adjusting the
"Setting the looper
tempo).
effect".
Advertisement
Table of Contents
