Task - Counter Threshold - Northern Telecom Meridian SL-1 Install Manual

7. FAER: This specifies the frame alignment error rate, in seconds, at
the remote site. Respond with 2-999. Default is 10.
8. PCMR: This specifies the PCM error rate, in seconds, at the
remote site. Respond with 2-999. Default is 600.
9. RPF: This specifies the remote processor failure rate in
milliseconds. Respond with 128-9999. Default is 1024.

Task - counter threshold

To define the RPE counter threshold data, respond with the following
prompts in overlay program 52.
1. GRP: This specifies RPE group number. Respond with 1-31.
2. TASK: This specifies the task selection. Respond with CTHS.
3. LFAL: This specifies the loss of frame alignment, in seconds, at
the local site. Respond with 0-255. Default is 5.
4. FAEL: This specifies the frame alignment error rate, in seconds, at
the local site. Respond with 0-255. Default is 5.
5. PCML: This specifies the PCM error rate, in seconds, at the local
site. Respond with 0-255. Default is 5.
6. LFAR: This specifies the loss of frame alignment, in seconds, at
the remote site. Respond with 0-255. Default is 5.
7. FAER: This specifies the frame alignment error rate, in seconds, at
the remote site. Respond with 0-255. Default is 5.
8. PCMR: This specifies the PCM error rate, in seconds, at the
remote site. Respond with 0-255. Default is 5.
9. RPF: This specifies the remote processor failure rate in seconds.
Respond with 0-255. Default is 3.
10. LINT: This specifies the Remote Peripheral Controller (RPC)
initialization, in seconds. Respond with 0-255. Default is 2.
11. BGTH: This specifies the number of unsparing attempts allowed by
background. Respond with 0-7. Default is 3. A response of 0
deactivates the background processing of overlay program 53 for
this RPE group.
Assembly and installation
Installation and acceptance procedures
2-23
553-2931-200