Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
Bridging
bridgi
no
no, yes
Allow or disallow bridging on the path
Only change this parameter to yes if bridging is to be
supported on this path. For more information on
Bridging, refer to page 1-24.
For bridging to work on a path, it must also be enabled
in the system# context of BCC (page 5-9).
Filt-Profile
filt-p
0
A User defined number
The profile number of the filter used on this path.
Filters can allow or disallow information into the router.
If filters have been created (page 8-11) assign the profile
number of the filter to be used on this path.
Working with Paths
4-39