User-Defined Address Mapping Sets - Nortel 252 Configuration

Table 24 SUA Address Mapping Rules
Field Description
Local End IP Local End IP is the ending local IP address (ILA). If
the rule is for all local IPs, then the start IP is 0.0.0.0
and the end IP is 255.255.255.255.
Global Start IP This is the starting global IP address (IGA). If you
have a dynamic IP, enter 0.0.0.0 as the Global Start
IP.
Global End IP This is the ending global IP address (IGA).
Type These are the mapping types discussed above. With
Server, you can specify multiple servers of different
types behind NAT to this machine. Examples is
found in the section
page
After you configure a rule in this menu, press
[ENTER] at the message "Press ENTER to
Confirm..." to save your configuration, or press
[ESC] to cancel.

User-Defined Address Mapping Sets

Go to menu 15.1. Enter 1 to bring up the menu shown in figure below. Look at the
differences from the previous menu. Note the extra Action and Select Rule fields
means you can configure rules in this screen. Note also that the [?] in the Set
Name field means that this is a required field and you must enter a name for the
set.
Note: The entire set is deleted if you leave the Set Name field blank and
press [ENTER] at the bottom of the screen.
Nortel Business Secure Router 252 Configuration — Advanced
Chapter 9 Network Address Translation (NAT) 111
"General NAT examples" on
119.
Example
255.255.255.255
0.0.0.0
Server