T7208 Telephone User Card
1-800-4 NORTEL
www.nortelnetworks.com
© 2004 Nortel Networks
P0609622 01
Printed in Canada
Your T7208 telephone
A
Telephone light
Flashes for incoming calls.
Lights up when Message Waiting Indication (MWI) is
supported by system software. Contact your system
administrator for more information.
B
Adjustable display
Shows the time and date, call and feature information.
Adjust the display to your personal preference.
®
C
Release button
Ends an active call or feature.
Dial pad
D
√
E
Volume control
Adjusts the handset, handsfree, headset and ringer
volume.
A
B
H
C
I
D
J
K
E
G
F
L
M
Your T7208 telephone
©
F
Mute button
Turns the microphone off or on when you are on a call.
¬
G
Headset button
Turns the headset mode on.
≤
Feature button
H
Starts or ends a feature.
≥
Hold button
I
Places calls on hold.
J
Memory and line buttons
Ω
K
Indicators
Appear next to active line and memory buttons.
L
Feature card plate
Storage compartment for your feature card.
M
Number card
Write your extension number on this card.
Cord connections
1
Insert line
cord.
Slide feature card plate
down.
2
Headset option
Connect cord to headset.
Connect cord to handset.
Warning
The earpiece/mouthcap region
on the handset may attract and
retain small objects.
3
Desk mount option
line cord
Press here to remove the stand.
Route line cord
through the stand
as shown. Place
line cord into the
slot on the stand.
Mount stand on telephone.
Connect line cord to wall jack.
Wall mount without a telephone stand
Press here to remove the stand.
1
Connect cords to the telephone,
refer to "Cord connections"
illustrations.
2
Connect line cord to
wall jack.
Place the telephone onto the
wall mount plate and slide
it down.
Wall mount with a telephone stand
1
Press here to remove the stand.
key hole slots
Use the key hole slots on the stand
to mark the location for the screws.
Tighten screws for a secure fit.
2
Mount the stand as shown.
Connect cords to the telephone,
refer to "Cord connections"
illustrations.
3
Mount the telephone
onto the screws and
slide it down.
Connect line cord to
wall jack.
Telephone setup
Display contrast level
Adjust the contrast of your display.
1. Press ≤•‡ .
2. Press ⁄ to · to select a contrast level. The higher
the number the higher the contrast level.
Language choice
≤•fi‚⁄
Select Primary Language for the telephone display.
≤•fi‚¤
Select Alternate Language for the telephone display.
≤•fi‚‹
Select Alternate Language 2 for the telephone display.
≤•fi‚›
Select Alternate Language 3 for the telephone display.
Ring type
Select a different ring for your telephone.
1. Press ≤•fl .
2. Press ⁄ , ¤ , ‹ , › to hear the different ring types.
3. Press ≤ to store the ring type.