Nortel T7100 User's Card

T7100 Telephone User Card
1-800-4 NORTEL
www.nortelnetworks.com
© 2003 Nortel Networks
P0605068 01
Printed in Canada
A
B
F
C
G
D
H
Adjust the display
to your personal
preference.
E
I
Write your extension
number on this card.
Cord connections
1 2
Desk mount option
Route line cord through the
stand.
Slide feature card plate
down.
Your T7100 telephone
A Telephone light
Flashes for incoming calls. Lights up when Message
Waiting Indication (MWI) is supported by system software.
Contact your system administrator for more information.
B Adjustable display
Shows the time and date, call and feature information.
® Release button
C
Ends an active call or feature.
D Dial pad

√ Volume control

E
Adjusts the handset and ringer volume.
≤ Feature button
F
Starts or ends a feature.
≥ Hold button
G
Places calls on hold.
H Memory button
I Feature card plate
Storage compartment for your feature card.
Wall mount without a telephone stand
Press here to remove
1
the stand.
Connect line cord to
wall jack.
Connect cords to the
Connect cord
telephone, refer to
to handset.
"Cord connections"
illustrations.
Wall mount with a telephone stand
1
Press here to remove
the stand.
2
Use the key hole slots
on the stand to mark
the location for the
screws. Tighten screws
for a secure fit.
key hole slots
2
Connect line cord to
wall jack.
Place the telephone onto the
wall mount plate and slide it
down.
3
Mount the stand as shown.
Connect cords to the telephone,
refer to "Cord connections"
illustrations.
4
Mount the telephone
onto the screws and
slide it down.
Connect line cord
to wall jack.