Operation; Web Server; Authentication - Eaton CROUSE-HINDS Series Instruction Manual

Operation

Call / answer
Calls can be made or answered by lifting the handset.
Dialling
Enter the telephone number you wish to dial using the
number keys. Once the connection has been established,
you can use the number keys and the star and hash keys
to transmit a touch-tone signal.
The dialling process is what is known as "block dialling" .
This means that the numbers must be entered quickly
one after the other. A certain length of pause will cause
the numbers entered up to that point to be dialled.

Web server

This section describes the administration/configuration
of the InduTel IP telephone. All functions and properties
of the telephone can be set via the web server. The web
server is in English. This cannot be changed.
IMPORTANT/GENERAL NOTE:
BEFORE PARAMETERS CAN BECOME EFFECTIVE,
THEY MUST BE ADOPTED BY PRESSING "OK" .
Figure 1 . Example of certificate issued from the device
in the Chrome browser
InduTel IP4 InsTrucTIon manual TMF037.A January 2023 www.eaton.com
Eaton InduTel IP4 Instruction manual
Speed-dial
With the key and a subsequent number key, you can dial
phone numbers that you have saved in advance with the
help of the web server of the InduTel IP .
Redial
By lifting the handset and pressing the redial button
( ), the last number entered will automatically be dialled
again, provided the InduTel IP has not been restarted.
Disconnect
If you want to end the call and directly start a new one,
you can press the Disconnect key ( ) instead of hanging
up the handset. The device will then be in sleep mode.
Once a new telephone number has been entered using
the number keys, press the redial key ( ). The number
entered will be dialled.

Authentication

Access to the web server is via the web browser. You
should use an up-to-date version of a common web
browser.
Take the IP address of the telephone from your network
equipment. (e.g. DHCP server)
IMPORTANT/GENERAL NOTE: The telephone
automatically redirects to an https://<ip> connection .
The certificate used for this is issued from the device
itself . The trust status must be adjusted in the web
browser used .
9