Eaton CROUSE-HINDS Series Instruction Manual page 2

Product names are used with no warranty of their unrestricted usability. Almost all
hardware and software denotations in this handbook are simultaneously registered
trademarks or should be considered as such.
All rights reserved. No part of this manual may be reproduced in any form (printing,
photocopying, microfilm or any other process) without prior expressed approval or
processed, reproduced or disseminated using electronic systems.
The greatest care was taken in the compilation of texts and illustrations as well as in
the creation of the software. Nevertheless, errors cannot be completely ruled out. This
documentation is therefore provided to the exclusion of any guarantee or warranty
of suitability for particular purposes. FHF reserves the right to improve or modify this
documentation without prior notice.
Should information in this instruction manual deviate from that in the printed instruction
manual enclosed with the product, the information contained in the instructions enclosed
shall apply in principle.
This instruction manual must be read carefully before installing the device.
N ote:
The contents of the packaging must be checked for completeness.
2 InduTel IP4 InsTrucTIon manual TMF037.A August 2022 www.eaton.com