Eaton InduTel IP4 Instruction manual
ETH0/IP4/IP6
In these menus, you can configure settings according to your network requirements and
use them to analyse connection problems.
Device
The Device menu provides device-specific settings
Relays
Figure 6 . Device-specific relay settings
In the "Relays" sub-menu (Fig. 6) you can configure the settings for the onboard relay as
well as for relays 1 and 2. (Relays 1 and 2 not in all models). In the default settings upon
delivery, the "Alert on" mode (not shown) is active.
12
InduTel IP4 InsTrucTIon manual TMF037.A January 2023 www.eaton.com