Table of Contents
Advertisement
AMG TRACK PACE
Function of AMG TRACK PACE
%
This function is an on-demand feature and
can be activated via Mercedes me after you
purchase your vehicle. The Digital Operator's
Manual contains further information on
Mercedes me and on-demand features.
With AMG TRACK PACE, the driving characteris-
tics on race tracks can be analyzed and opti-
mized. You can drive previously saved race tracks
(e.g. Hockenheimring), or record and save new
tracks. The driven lap times are stored for every
track. These can be analyzed and compared with
other lap times to achieve the best possible race
results. Additionally, acceleration and braking pro-
cedures can be measured and stored.
Note: Use AMG TRACK PACE only on closed-off
routes outside the public traffic area. Adapt your
driving style to your personal performance and
environmental conditions. As the driver, you are
solely responsible for driving your vehicle. Park
your vehicle safely before operating the applica-
tion.
Setting Track Race
Multimedia system:
TRACK PACE
Track Race
4
5
Recording a new track
#
Select
New
Track.
Select Ì
Start Recording
at the desired
#
starting point.
The track recording starts at this point.
During track recording, sectors can be set to
divide up the track.
ö Select
Set
Sector.
#
Select É
Stop Recording
to end track
#
recording or cross the starting line again.
Confirm the prompt with Yes.
#
Select the weather.
#
%
The temperature is determined automatically.
Enter a name.
#
Press a to confirm.
#
The track is saved under the name entered.
MBUX multimedia system
Searching by track name
Select ª Search.
#
Enter the track name.
#
Tracks with the searched name are displayed.
Measuring time on a saved track
#
Select
All
tracks.
Select the desired track.
#
Select u.
#
Start Time Recording
Select
if you are already
#
at the starting line.
or
Select
Navigate to
for navigation to the start-
#
ing line.
Timing begins automatically when the starting line
has been crossed.
%
When ¨ is selected, the track display can
be switched to AR. In addition, it is possible to
switch to the telemetry display by selecting
ò.
Select ð
Stop timing
to end timing.
#
27
Hide quick links:
Advertisement
Table of Contents
