Driver Display Menus - Mercedes-Benz EQE 2023 Manual

AMG DYNAMICS
-
Suspension
-
Sound
-
Engine data (current power and current tor-
R
que)
%
The settings for the setup display content can
be configured either via the buttons on the
multifunction steering wheel or via the MBUX
multimedia system ( page 11).
/
On the Service menu, in addition to the informa-
tion on the message memory, tire pressure and
ASSYST PLUS, there is a display for the tempera-
ture of the high-voltage battery and the high-volt-
age motors.
On most of the menus, you can use the
sub-menu to configure further settings for the
menu-specific display content.
Calling up or exiting the Options submenu
To call up: press left-hand Touch Control 3.
#
To exit: press back button 1.
#
Browsing through display content or lists
Swipe up, down, left or right on left-hand
#
Touch Control 3.
%
Within different menus, icons also appear at
the right edge of the center display section to
indicate the current position on a list.
Setting display content as the standard display
You can set custom-configured menu display con-
tent as the standard display.
Press and hold left-hand Touch Control
#
until the bar display that appears is completely
filled.
The Set Shortcut?
Swipe left on left-hand Touch Control
#
select Yes.
Options
To confirm: press left-hand Touch Control 3.
#
To call up standard displays: press back but-
#
ton 1 on the upper level of a menu.
% Pressing back button
play will call up the previous menu.
Resetting values
To call up the Options submenu: press left-
#
hand Touch Control 3.
To select the function to be reset: press left-
#
hand Touch Control 3.
Select Yes.
#
To confirm: press left-hand Touch Control 3.
#

Driver display menus

3
Configuring settings on the Supersport menu
Driver's display:
prompt will appear.
4
3
and
To call up the menu: press the left-hand Touch
#
Control.
To select: swipe upwards or downwards on the
#
left-hand Touch Control and select the desired
display content.
1 on the standard dis-
Driver display
Supersport
23