Table of Contents
Advertisement
English
RIGHT ANGLE DRILL
SFMCD750
Congratulations!
You have chosen a STANLEY FATMAX tool. Years of experience,
thorough product development and innovation make STANLEY
FATMAX one of the most reliable partners for professional power
tool users.
Technical Data
Voltage
Type
Battery type
No‑load speed
1st gear
2nd gear
Max. Torque
Chuck capacity
Maximum drilling capacity
Wood
Metal
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑1:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
2
V
DC
min‑1
min‑1
Nm
mm
mm
mm
kg
dB(A)
dB(A)
dB(A)
=
m/s
2
m/s
2
EC‑Declaration of Conformity
Machinery Directive
Right Angle Drill
SFMCD750
SFMCD750
STANLEY FATMAX declares that these products described under
18
Technical Data are in compliance with:
1
2006/42/EC, EN62841-1:2015 + AC.2015 + A11:2022, EN62841-
Li‑Ion
2-1:2018+A11:2019.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact STANLEY
0–600
FATMAX at the following address or refer to the back of
0–1950
the manual.
45
The undersigned is responsible for compilation of the technical
10
file and makes this declaration on behalf of .
28
10
1,4
Patrick Diepenbach
General Manager, Benelux
STANLEY FATMAX, Egide Walschaertsstraat 14-18
75
2800 Mechelen, Belgium
83
30.09.2022
5
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
< 2,5
1,5
Right Angle Drill
SFMCD750
STANLEY FATMAX declares that these products described under
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841‑1:2015 + AC.2015 + A11:2022, EN62841‑2‑1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact STANLEY FATMAX at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
REGULATIONS 2008
WALT.
e
Advertisement
Table of Contents
