Receive Mms And E-Mail Settings; Inbox-Receive Messages - Nokia N91 User Manual

Note: The indicators showing that the message has
been sent indicate that the message has been sent
by your device to the message center number
programmed into your device. This is not an
indication that the message has been received
at the intended destination. For more details about
messaging services, check with your
service provider.

Receive MMS and e-mail settings

You may receive the settings in a text message from
your network operator or service provider.
See 'Data and settings', p. 57.
For availability of and subscription to data services,
contact your network operator or service provider.
Follow the instructions given by your service provider.
Enter the MMS settings manually:
1 Press , and select
Access points, and define the settings for a multimedia
messaging access point. See 'Connection', p. 97.
2 Press , and select
Multim. msg.
point you created as the preferred connection. See also
'Multimedia messages', p. 62.
56
Tools > Settings > Connection
Messaging > Options
> Access point in use and the access
Before you can send, receive, retrieve, reply to, and forward
e-mail, you must do the following:
• Configure an Internet access point (IAP) correctly.
See 'Connection', p. 97.
• Define your e-mail settings correctly. If you select
Mailbox
up your e-mail account, you are prompted to do so.
To start creating the e-mail settings with the mailbox
guide, select Start. See 'E-mail', p. 63.
You must have a separate e-mail account. Follow
the instructions given by your remote mailbox
and Internet service provider (ISP).
Inbox—receive messages
Inbox folder has the following indicators:
—Unread text message.
—Unread multimedia message.
>
—Data received through Bluetooth connectivity.
When you receive a message,
message are shown in the standby mode. To open the
> Settings >
message, select Show. To open a message in Inbox, scroll
to it, and press the joystick.
To reply to a received message, select
in the Messag. main view and have not set
and the text
Options
1 new
> Reply.