Receive Mms And E-Mail Settings - Nokia N91 User Manual

Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
will be sent as a series of two or more messages. Your
service provider may charge accordingly. Characters that
use accents or other marks, and characters from some
language options like Chinese, take up more space
limiting the number of characters that can be sent in a
single message. In the navigation bar, you can see the
message length indicator counting backwards. For
example, 10 (2) means that you can still add 10 characters
for the text to be sent as two messages.
E-mail messages are automatically placed in
before sending. If sending does not succeed, the e-mail is
left in the Outbox
Tip! In Messaging
and send them in a multimedia message. In the
multimedia message editor view, select
Create presentation
mode is set to
messages', p. 60.
Tip! When you send a multimedia message to an
e-mail address or a device that supports the receiving
of large images, use the larger image size. If you are
not sure of the receiving device, or the network does
not support sending large files, it is recommended that
you use a smaller image size or a sound clip that is no
longer than 15 seconds. To change the setting, select
54 Copyright © 2005 Nokia. All rights reserved.
with the Failed status.
you can also create presentations
Options
(shown only if MMS creation
Guided or Free). See 'Multimedia
Options
size in the
message center number programmed into your device.
This is not an indication that the message has been
received at the intended destination. For more details
about messaging services, check with your service
provider.

Receive MMS and e-mail settings

Outbox
You may receive the settings in a text message from your
network operator or service provider. See 'Data and
settings', p. 55.
For availability of and subscription to data services,
>
contact your network operator or service provider. Follow
the instructions given by your service provider.
Enter the MMS settings manually:
1
Press
Access points, and define the settings for a multimedia
messaging access point. See 'Conn. settings', p. 98.
2
Press
Settings
the access point you created as the preferred
connection. See also 'Multimedia messages', p. 60.
> Settings > Multimedia message
Messaging main view.
Note: The indicators showing that the
message has been sent indicate that the
message has been sent by your device to the
, and select Tools > Settings
, and select Messaging > Options
> Multim. msg. > Access point in use
> Image
> Connection >
>
and