Log In To Push To Talk; Exit Push To Talk; Make A One-To-One Call - Nokia N91 User Manual

Connection:
Domain—Enter the domain name obtained from your
service provider.
Access point name—Enter the push-to-talk access
point name. The access point name is needed to
establish a connection to the GSM/GPRS network.
Server address—Enter the IP address or domain name
of the push-to-talk server obtained from your service
provider.
User name—Enter your user name obtained from your
service provider.
PTT password—Enter a password, if required, to make
a data connection. The password is usually provided by
the service provider and is often case-sensitive.

Log in to push to talk

Press , and select My Own
talk automatically logs in to the service when started.
When log in is successful, push to talk automatically
connects to groups that were active when the application
was last closed. If the connection is lost, the device
automatically tries to log back in until you choose to

exit push to talk.

> Push to talk. Push to
Exit push to talk
Select Options > Exit. Switch Push to talk off after
exiting application? is displayed. Select
the application active on the background or
out and close the service.
If several applications are open and you want to switch
from one application to another, press and hold

Make a one-to-one call

Select Options > PTT contacts.
Select the contact you want to talk to from the list
and select Options > Talk 1 to
Press and hold the entire time you are talking.
When you have finished talking, release
You must end the one-to-one call before you can
create a new call. Select Disconnect
Tip! Remember to hold the device in front of
you during a push-to-talk call so you can see
the display. Speak towards the microphone, and
do not cover the loudspeaker with your hands.
Yes to keep
No to log
.
1.
.
or press .
73