Nokia N91 User Manual page 100

Prompt password—Select Yes
password every time you log in to a server, or if you do not
want to save your password in your device.
Password—A password may be needed to make a data
connection, and it is usually provided by the service
provider. The password is often case-sensitive.
Authentication—Select Normal
Homepage—Depending on what you are setting up, write
the Web address or the address of the multimedia messaging
center. Complete the Advanced settings
your access details:
Network type—Select the Internet protocol type to use:
IPv4 settings or IPv6 settings. The other settings depend
on the selected network type.
Phone IP address (for IPv4)—Enter the IP address of your
device.
DNS address— Primary name
Contact your Internet service provider to obtain these
addresses.
Glossary: The domain name service (DNS) is an
Internet service that translates domain names
such as www.nokia.com into IP addresses like
192.100.124.195.
Proxy serv. address—Define the address for the proxy server.
Proxy port number—Enter the proxy port number.
if you must enter a new
or Secure.
to further define
serv.:, Second. name server:
Wireless LAN
Follow the instructions from your service provider.
WLAN netw. name—Select
netw.. If you select an existing network,
and WLAN security mode
of its access point device.
WLAN netw. mode—Select
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
WLAN security mode—Select the encryption used: WEP,
802.1x (not for ad hoc networks), or WPA/WPA2. If you
select Open network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the network
supports them.
WLAN security sett.—Enter the settings for the selected
security mode:
Security settings for WEP:
Wep key in use—Select the WEP key number. You can create
up to four WEP keys. The same settings must be entered on
the wireless LAN access point device.
Authentication type—Select
authentication type between your device and the wireless
LAN access point device.
WEP key settings—Enter WEP encryption
key), WEP key format (ASCII
key (the WEP key data in the selected format).
Enter manually or Search for
WLAN netw. mode
are determined by the settings
Ad-hoc to create an ad-hoc
Open or Shared for the
(length of the
or Hexadecimal), and WEP
99