Receive Data Using A Bluetooth Connection; Switch Off Bluetooth Connectivity; Pc Connections; Cd-Rom - Nokia N90 User Manual

Receive data using a
Bluetooth connection
When you receive data using a Bluetooth connection, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
placed in the Inbox folder in Messaging. Messages received
using a Bluetooth connection are indicated by
"Inbox—receive messages‚" p. 61.

Switch off Bluetooth connectivity

To switch off Bluetooth connectivity, select

PC connections

You can use your device with a variety of PC connectivity
and data communications applications. With Nokia PC
Suite you can, for example, synchronize contacts, calendar
and To-do notes, and transfer images between your device
and a compatible PC.
Always create the connection from the PC to synchronize
with your device.
For further information on how to install Nokia PC Suite
(compatible with Windows 2000 and Windows XP), see the
User Guide for Nokia PC Suite and the Nokia PC Suite help
in the 'Install' section on the CD-ROM.
is shown, and the item is
. See
Bluetooth > Off.

CD-ROM

The CD-ROM should launch after you have inserted it into
the CD-ROM drive of a compatible PC. If not, proceed as
follows: Open Windows Explorer, right-click the CD-ROM
drive where you inserted the CD-ROM, and select Autoplay.

Your device as a modem

You can use your device as a modem to send and receive
e-mail, or to connect to the Internet with a compatible PC
by using a Bluetooth connection or a data cable. Detailed
installation instructions can be found in the User Guide for
Nokia PC Suite in Modem options on the CD-ROM.
Tip! When using Nokia PC Suite for the first time, to
connect your device to a compatible PC and to use
Nokia PC Suite, use the Get Connected wizard available
in Nokia PC Suite. See the CD-ROM if supplied.

Connection manager

You may have multiple data connections active at the same
time when you are using your device in GSM and UMTS
networks. Press , and select
view the status of multiple data connections, view details
on the amount of data sent and received, and end connections.
When you open Conn. mgr., you can see the following:
Connect. > Conn. mgr. to
81