Options During A Video Call; Log; Recent Calls; Call Timers - Nokia N90 User Manual

Options during a video call

Select Options during a video call for the following options:
Enable or Disable
audio, or both in the Imaging mode),
headset with Bluetooth connectivity is attached),
loudsp., or Activate handsfree
a headset with Bluetooth connectivity is attached),
active call, Change image
(Imaging mode only), and Help.

Log

Recent calls

To monitor the phone numbers of missed, received, and
dialed calls, press
calls. The device registers missed and received calls only if
the network supports these functions, the device is
switched on, and within the network service area.
Tip! When you see a note in the standby mode about
missed calls, select
calls. To call back, scroll to a name or number, and
press .
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
24
(audio in the Fold open mode; video,
Activate handset
(Fold open mode only, and if
order, Zoom in/Zoom out
, and select My own > Log
Show to access the list of missed
Options > Clear recent
registers, open the register you want to erase, and select
Options > Clear
register, scroll to the event, and press
(if a

Call timers

Activate
To monitor the approximate duration of your incoming
and outgoing calls, press
End
Call timers.
To set the call duration to show on the display each time a
call is active, select
Show call duration. Select
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code, see "Security",
> Recent
"Phone and SIM‚" p. 96.

Packet data

To check the amount of data sent and received during
packet data connections, press
Log > Packet
your packet data connections by the amount of data sent
and received.
list. To clear an individual event, open a
, and select My own
My own> Log > Options
Yes or No.
Options
, and select
data. For example, you may be charged for
.
> Log >
> Settings >
> Clear
My own >