CHARGING OF NICD/NIMH BATTERY
NIMH CHARGE Aut
CUR
LIMIT 5.0A
- +
- +
DEC
INC
DEC
Batt type
Start
Stop
Enter
NIMH 2.0A
CHG 022:45 00890
Battery
Elapsed
Battery
type
time
voltage
Charge current
Charged capacity
CHARGING NICD/NIMH BATTERY IN THE CHARGE MODE
This program charges the battery using the charge current you set up.
In the "auto" function, you should set the upper limit of the charge
current to avoid damage by excessive charge current. Some batteries
of low resistance and capacity can lead to higher currents in the "auto"
charging mode. For these types of batteries, it will charge with the
current you set. You can change modes by pressing the START/ENTER
key to modify the current field and press INC and DEC simultaneously
to swap between Auto and Manual Mode. NOTE: Allowable fast charge
current: 1C-2C
DISCHARGE OF NICD/NIMH BATTERY
NIMH DISCHARGE
1.0A
- +
- +
DEC
INC
DEC
Batt type
Start
Stop
Enter
NIMH 1.0A
DSC 022:45 00890
Battery
Elapsed
Battery
type
time
voltage
Discharge
Discharged
current
capacity
CHARGING OF NICD/NIMH BATTERY
This program is for charging NiCd/NiMH
batteries associated with R/C model applications.
Pressing the START/ENTER key to modify the
menu and then INC or DEC to change the
INC
parameter settings. Press the START/ENTER
key to store the setting.
'>3 seconds'
This shows the real-time status of discharging;
7.42V
you can press the BATT TYPE/STOP key to
stop discharging.
Set the discharge current on the left and the
voltage cutoff on the right by pressing the
11.5A
START/ENTER key for more than 3 seconds
to start the program. Discharge current can be
INC
set from 0.1-1.0A and voltage cutoff from
'>3 seconds'
0.1-25.0V.
This screen indicates the discharging state.
7.42V
You can press the START/ENTER key to alter
the discharge current. Press the START/ENTER
key again to store the setting. Press the
BATT TYPE/STOP key to stop discharging. A
sound will emit to indicate the end of discharging.
- 20 -